• Winch-Hoists
  • Accessories
  • Factory-Installed Options
  • Maintenance
  • Additional Products
  • All
  • Standard
  • Max
  • Capstan
  • I-Beam
  • Versatile
  • Home
  • Distributors
  • Warranty Registration
  • About My-teŽ
  • Contact Us

Accessories

My-te winch-hoists may be provided with wire rope and hook installed. My-te stocks the following items.

Click here for Capstan Accessories

 

  MyTe Winch-Hoists Won't Let You Down

Cable Guides

Part No. 148320 (shown)
• Standard Model Nos. 10-12, 100AB


Part No. 771220
• Max Model Nos. AC36B, DC48 (factory-installed)

A must for pulling at angles away from the winch drum. Cable guide ensures that cable is pulled around to wind on drum. Two vertical, two horizontal rollers mounted on a sturdy welded frame. Easily bolts to any surface. Reduces cable and drum flange wear.
  MyTe Winch-Hoists Won't Let You Down

Cables & fittings

Hook with safety latch—complete and installed on cable:


Part No. 828020
• One-ton hook installed
 
 
Part No. Description Breaking Strength
821010 1/8" – 7"x19" Preformed galvanized aircraft cable 2,000 lb.
821020 3/16" – 7"x19" Preformed galvanized aircraft cable 4,200 lb.
821030 1/4" – 7"x19" Preformed galvanized aircraft cable 7,000 lb.
828050 Swivel hook and safety latch – one-ton rated capacity
828110 Eye installed with nicopress – 1/8", 3/16", 1/4" cable sizes
828210 Cable assembly 1/4" x 50' with one-ton hook
828220 Cable assembly 1/4" x 125' with one-ton hook
828230 Cable assembly 1/4" x 250' with one-ton hook
828240 Cable assembly 5/16" x 100' with one-ton hook
828250 Cable assembly 5/16" x 150' with one-ton hook
828260 Cable assembly 3/8" x 50' with two-ton hook
828270 Cable assembly 3/8" x 110' with two-ton hook
Any cable purchased with a My-te winch-hoist is wrapped on the drum at no extra cost.
 
  MYTE WINCH-HOISTS WON'T LET YOU DOWN

Sheave Blocks

Available for double-line lifting or pulling operations. All blocks have a safety hook and pin for easy sheave removal.

 

See chart below for more sheave blocks.

 
 
Part No. Description Use on Winch Model
818010 3,000-lb. medium-duty block 10-12, 20-12, 100AB, 150AB, standard on 800AB
818020 Heavy-duty block, 6,000-lb. capacity AC36B, DC48
818040 4" sheave mounting bracket assemble  
811010 4" sheave – 1/2" bore – bronze bushed  
811020 6" sheave – 3/4" bore – bronze bushed  
Any cable purchased with a My-te winch-hoist is wrapped on the drum at no extra cost.
  winch-hoist key wall switch

Electrical Accessories

Key Wall Switch (shown on left)


Other electrical accessories are shown in chart below.

 
 
Part No. Description Use on Winch Model
518330 Heavy-duty contactor panel 100AB, AC36B
538143 Key wall switch, 3-wire, 1-pair switches on single faceplate 12-volt, 500, limit switch models
538154 Key wall switch, 4-wire, 1-pair switches on single faceplate 115-volt only, (100AB standard)
541010 Switch cord, 3-wire, up to 250' All 12-volt and limit switch models
541020 Switch cord, 4-wire, up to 250' 100A, AC36
541030 Power cord, 3-wire, 14 ga. All 115-volt AC Models
Any cable purchased with a My-te winch-hoist is wrapped on the drum at no extra cost.
  MyTe Winch-Hoists Won't Let You Down

Trolley Wheels

Part No. 154010
• 4" diameter trolley wheel
• Includes threaded axle


Part No. 154020
• Heavy-duty
• 6" diameter trolley wheel
• Includes threaded axle
 

Capstan Accessories

 

  winch foot switch

Foot Switch Control

Available as a factory option at no charge.

Two-position pedal switch on a 10' cord. Available on 12-volt and 115-volt units in place of standard hand switch. Used where operator’s hands must be free to help direct loads.
  winch pole mount adapter

Pole-Mount Adapter

Part No. 148353

Sturdy steel construction with mounting bolts for bolting adapter to winch frame. Comes complete with chain tightener for securing to pole. Allows same base-mounted unit to be used in either installation.
  MyTe Winch-Hoists

Swivel Mount

Part No. 148330

Designed for installation with My-te’s Capstan Series Model 30-12 Winch-Hoist. Swivel mount bolts to your truck bed. Capstan winch frame bolts to swivel mount using tapped mounting holes. Winch rotation allows you to use your winch even when your truck is in an awkward location. Pin stop locks swivel base in one position.
  hydraulic winch foot control valve

Hydraulic Foot Control Valve

Part No. 468060

Works on any My-te hydraulic unit. Perfect solution for when operator’s hands must be free to help direct loads. Enlarged diamond-plate base and a large reversible foot pedal are easy to feel for and actuate when one’s attention must be focused elsewhere.
  winch hitch mount

Receiver Hitch Mount

Part No. 148452

Bolts to the capstan winch-hoist in order to mount the unit using a utility truck’s 2" receiver hitch. The mounting plate is shipped with hardware, but the receiver hitch pin is not included. Mounting plate may be used with any current frame style My-te capstan.